Product ID:CALDWELD ALUMINUM WELDING MATERIAL
MSDS Date:08/20/1991
FSC:3439
NIIN:00F009533
Status Code:A
MSDS Number: CJDMT

ERICO PRODUCTS INC

34600 SOLON ROAD
SOLON, OH 44139

Emergency Phone: (216) 248-0100

Info Phone: (216) 248-0100

Preparer: R E RYLANDER

Cage: 14045

ERICO PRODUCTS INC

SOLON, OH 44139-2631 US

Telephone: 216-248-0100

Cage: 14045

TIN(IV) OXIDE

CAS: 18282-10-5

RTECS: XQ4000000

OSHA PEL 2 MG/M3 (SN)

ACGIH TLV: 2 MG/M3 (SN); 9192

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

COPPER OXIDE

CAS: 1317-39-1

RTECS: GL8050000

OSHA PEL 1.0 MG/CUM (DUST)

ACGIH TLV: 1.0 MG/CUM

CALCIUM FLUORIDE

CAS: 14542-23-5

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: BURNS FROM CONTACT W/REACTION OR
PRODUCTS. EYE: DIRECT CONTACT WITH "FLASH" OF LIGHT FROM REACTION,
CAN RESULT IN TEMPORARY BLINDNESS. INHALATION: DUST & FUMES ARE
IRRITANT TO EYES & UPPER RESPI RATORY TRACT. COPPER OXIDE DUST:
REPEATED/PROLONGED INHALATION CAUSES ULCERATION & PERFORATION OF
THE NASAL SEPTUM. LONG TERM EXPOSURE TO COPPER MAY CAUSE ALLERGIC
DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION

First Aid:INHALATION: REMOVE FROM EXPOSURE, PROVIDE FRESH AIR. EYE:
FLUSH WITH WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:>898.9C, 1650.F
Extinguishing Media:NONE
Fire Fighting Procedures:HALOGENATED EXTINGUISHING AGENTS/WATER SHOULD
NOT BE USED. LET FIRE EXTINGUISH ITSELF. USE SELF-CONTAINED
BREATHING APPARATUS, IN PRESSURE-DEMAND MODE.
Unusual Fire/Explosion Hazard:MATERIAL DUST MAY BE IGNITED BY STATIC
DISCHARGE/BURNS AT EXTREMELY HIGH TEMPERATURE. ONCE SUSPENDED IN
DUST-LADEN AIR CLOUD, IT'S READILY IGNITED/REACTS VERY RAPIDLY AKIN
TO AN EXPLOSION.

Spill Release Procedures:ALL UNUSED MATERIALS MAY BE SWEPT UP FOR
DISPOSAL USING SOFT, DRY SPONGE/SOFT NATURAL FIBER BRUSH, &
NON-SPARKING CONDUCTIVE SCOOP. AVOID ACTIONS THAT WOULD CREATE
DUST-LADEN CLOUD/CAUSE MATERIAL TO D ISPERSE IN AIR.

Handling and Storage Precautions:MATERIALS MUST BE KEPT DRY & STORED
ONLY DESIGNATED MFG./STORAGE AREA. RESTRICTED TO ACCESS BY
AUTHORIZED PERSONNEL. THESE MATERIALS MUST BE STORED UNDER SHELTER
TO PROTECT THE BOXES FROM THE ELEMENTS & RAISED TO PROTECT THEM
FROM DAMPNESS/SURFACE WATER.
Other Precautions:PERSONNEL HANDLING MATERIAL MUST BE WEARING STATIC
GROUNDING DEVICES & PROPER PROTECTIVE CLOTHING. ABSOLUTELY NO
SMOKING/OPEN FLAME SHALL BE PERMITTED FOR PERSONNEL HANDLING
MATERIAL.

Respiratory Protection:WHERE TLV IS EXCEEDED, USE NIOSH APPROVED
PARTICULATE RESPIRATOR.
Ventilation:LOCAL EXHAUST: USE ONLY WHEN TLV IS EXCEEDED. MECHANICAL:
MUST BE SPECIFICALLY APPROVED FOR USE W/REACTIVE, COMBUSTIBLE DUST.
Protective Gloves:MANDATORY
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SYNTHETIC FABRICS CAPABLE OF ACCUMULATING
STATIC CHARGE SHOULD NOT BE WORN. STATIC GROUNDING DEVICES MUST BE
WORN AT ALL TIMES BY PERSONNEL ENTERING MFG. AREA FOR ANY PURPOSE.
Supplemental Safety and Health

Melt/Freeze Pt:=250.C, 482.F
Spec Gravity:5
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVERY-WHITE POWDER; ODORLESS

Stability Indicator/Materials to Avoid:YES
WILL REACT W/MINERAL ACIDS/HALOGENATED CPDS/HARSH ALKALIS/MATERIALS
CAPABLE OF CAUSING SPARKS/STRONG STATIC SHOULD NOT BE USED.
Stability Condition to Avoid:TEMPERATURES ABOVE IGNITION. OPEN FLAME,
MOISTURE
Hazardous Decomposition Products:NONE

Waste Disposal Methods:FOR DISPOSAL OF THIS MATERIAL AS WASTE, MIX
W/INERT INGREDIENT (SAND) IN 1:1 RATIO/DISPOSE OF IN ACCORDANCE
WITH METHODS OUTLINED BELOW, & FEDERAL, STATE, & LOCAL REGULATIONS.
DISPOSAL MAY ALSO BE BY REACTION OF CONTROLLED QUANTITIES.

SARA Title III Information:THIS PRODUCT CONTAINS 10%-20% COPPER &
COPPER COMPOUNDS & 40%-45% ALUMINUM WHICH ARE SUBJECT TO REPORTING
REQUIREMENTS OF SECTION 313 OF TITLE III OF SRA & 40 CFR 372.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.